Pricing
Category
Brand
Search code
ALPA3S50FGAS
Specifications
Shaft type
Conical 1:8 with 4 mm key
Ø Fitting edge
50,8 mm
Stroke volume / Pump group
33 cc (group 3)
front flange
European 4 hole
Direction
CCW
Operating pressure
230 bar
Hydraulic connecting ports
BSPP-ports (GAS)
Special edition
with shaft seal
Single-For-Between-End
front pump
Extra
Build type | front pump |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up |
Temperature range | -10⁰C +80⁰C |
Inlet pressure | 0,7 - 3 bar |
Size mounting holes front | 98,5x128 mm |
key width | 6.35 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | rubber |
Material gears | special hardened steel |
Flange | european 4-hole mounting, Ø 50,8 mm |
Shaft type | conical 1:8 with key |
Connection | BSPP ports (GAS) |
Rotation | ccw |
Displacement | 33 cm3/rev |
Pressure continuous | 230 bar |
Max. pressure intermittent | 250 bar |
Max. peak pressure | 270 bar |
Max. revs | 3000 rpm |
Min. revs | 500 rpm |
Shaft thread | M14x1,5 |
Shaft length | 42 mm |
Shaft length inc. fitting edge | 47 mm |
Height fitting edge | 5 mm |
Dia. fitting edge | 50.8 mm |
Center inlet - front | 68.5 mm |
Front - back excl. fitting edge | 144.5 mm |
Thread connection sunction side | G1 |
Thread connection press side | G3/4 |
Dia. mounting hole front | 11 mm |
Shaft load 1 (Max. torq) | 300 Nm |
Flow at 1500 Rpm | 48 l/min |
Max. torq shaft | 100±4 Nm |
bearings | yes |
Volume efficiency | 93% between 1000 - 2000rpm |