English
Nederlands
Deutsch
Specifications
Flange
European 4-hole mounting
Axle type
cylindrical dia. 12mm with key
Connection
BSPP ports (GAS)
Turning direction
both
Displacement
6.2 cm3/rev
Flow at 1500 Rpm
8.8 l/min
Category
Search code
ALM1R9C0FGE1
| Build type | gear motor |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 230 bar |
| Max. pressure intermittent | 220 bar |
| Max. peak pressure | 245 bar |
| Max. revs | 3800 rpm |
| Min. revs | 700 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft diameter | 12 mm |
| Shaft thread | M10x1 |
| Shaft length | 26 mm |
| Shaft length inc. fitting edge | 31.5 mm |
| Height fitting edge | 5.5 mm |
| Dia. fitting edge | 30 mm |
| Center inlet - front | 47 mm |
| Front - back excl. fitting edge | 94.5 mm |
| Thread connection sunction side | G1/2 |
| Thread connection press side | G1/2 |
| Dia. mounting hole front | 6.5 mm |
| Size mounting holes front | 56x73 mm |
| Dia. drain connection | 1/4" BSP |
| key width | 3 mm |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 55 Nm |
| Flange | European 4-hole mounting |
| Shaft type | cylindrical dia. 12mm with key |
| Connection | BSPP ports (GAS) |
| Turning direction | both |
| Displacement | 6.2 cm3/rev |
| Flow at 1500 Rpm | 8.8 l/min |