English
Nederlands
Deutsch
Specifications
Flange
SAE A version 2-hole
Axle type
cylindrical SAE dia. 15,88mm with key
Connection
SAE J-475 UNF
Turning direction
both
Displacement
14.1 cm3/rev
Flow at 1500 Rpm
20.1 l/min
Category
Search code
ALM2AR20E1
| Build type | gear motor |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 230 bar |
| Max. pressure intermittent | 220 bar |
| Max. peak pressure | 250 bar |
| Max. revs | 3200 rpm |
| Min. revs | 700 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft diameter | 15.88 mm |
| Shaft length | 25.6 mm |
| Shaft length inc. fitting edge | 32 mm |
| Height fitting edge | 6.4 mm |
| Dia. fitting edge | 82.55 mm |
| Center inlet - front | 53 mm |
| Front - back excl. fitting edge | 108.5 mm |
| Thread connection sunction side | 1 1/16-12 UNF |
| Thread connection press side | 1 1/16-12 UNF |
| Dia. mounting hole front | 11.1 mm |
| Size mounting holes front | 106.4 mm |
| Dia. drain connection | 1/4" BSP |
| key width | 3.97 mm |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 140 Nm |
| Flange | SAE A version 2-hole |
| Shaft type | cylindrical SAE dia. 15,88mm with key |
| Connection | SAE J-475 UNF |
| Turning direction | both |
| Displacement | 14.1 cm3/rev |
| Flow at 1500 Rpm | 20.1 l/min |