English
Nederlands
Deutsch
Specifications
Flange
European 4-hole mounting
Connection
standard European port
Turning direction
both
Displacement
9.6 cm3/rev
Flow at 1500 Rpm
13.7 l/min
Category
Search code
ALM2R13C4E1T
| Build type | gear motor |
| Max. torq shaft | 70±4 Nm |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 250 bar |
| Max. pressure intermittent | 240 bar |
| Max. peak pressure | 270 bar |
| Max. revs | 3000 rpm |
| Min. revs | 700 rpm |
| Center inlet - front | 49.5 mm |
| Front - back excl. fitting edge | 101.5 mm |
| Size bolts sunction side | 40 mm |
| Thread bolt press side | M8 |
| Dia. drain connection | 1/4" BSP |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 200 Nm |
| Flange | European 4-hole mounting |
| Connection | standard European port |
| Turning direction | both |
| Displacement | 9.6 cm3/rev |
| Flow at 1500 Rpm | 13.7 l/min |