English
Nederlands
Deutsch
Specifications
Flange
European 4-hole mounting
Axle type
conical 1:8 with key
Connection
BSPP ports (GAS)
Turning direction
both
Displacement
28.2 cm3/rev
Flow at 1500 Rpm
40.1 l/min
Category
Search code
ALM2R40FGE1
| Build type | gear motor |
| Max. torq shaft | 70±4 Nm |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 170 bar |
| Max. pressure intermittent | 160 bar |
| Max. peak pressure | 185 bar |
| Max. revs | 2500 rpm |
| Min. revs | 500 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft thread | M12x1,5 |
| Shaft length | 35 mm |
| Shaft length inc. fitting edge | 40 mm |
| Height fitting edge | 5 mm |
| Dia. fitting edge | 36.5 mm |
| Center inlet - front | 64 mm |
| Front - back excl. fitting edge | 130.5 mm |
| Thread connection sunction side | G3/4 |
| Thread connection press side | G3/4 |
| Dia. mounting hole front | 8.5 mm |
| Size mounting holes front | 71,5x96 mm |
| Dia. drain connection | 1/4" BSP |
| key width | 4 mm |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 200 Nm |
| Flange | European 4-hole mounting |
| Shaft type | conical 1:8 with key |
| Connection | BSPP ports (GAS) |
| Turning direction | both |
| Displacement | 28.2 cm3/rev |
| Flow at 1500 Rpm | 40.1 l/min |