English
Nederlands
Deutsch
Specifications
Flange
SAE AA version 2-hole
Axle type
spline-shaft SAE 13T 16/32-30
Connection
standard European port
Turning direction
both
Displacement
33 cm3/rev
Flow at 1500 Rpm
48 l/min
Category
Search code
ALM3AR50S1EE1
| Build type | gear motor |
| Max. torq shaft | 100±4 Nm |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 230 bar |
| Max. pressure intermittent | 220 bar |
| Max. peak pressure | 250 bar |
| Max. revs | 3300 rpm |
| Min. revs | 500 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft diameter | 22.2 mm |
| Shaft length | 31.3 mm |
| Shaft length inc. fitting edge | 41 mm |
| Height fitting edge | 9.7 mm |
| Dia. fitting edge | 101.6 mm |
| Center inlet - front | 69.5 mm |
| Front - back excl. fitting edge | 139.5 mm |
| Thread mounting bolt sunction side | M10 |
| Size bolts sunction side | 56 mm |
| Thread bolt press side | M10 |
| Size bolts press side | 56 mm |
| Dia. mounting hole front | 14.3 mm |
| Size mounting holes front | 146 mm |
| Dia. drain connection | 3/8" BSP |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 600 Nm |
| Flange | SAE AA version 2-hole |
| Shaft type | spline-shaft SAE 13T 16/32-30 |
| Connection | standard European port |
| Turning direction | both |
| Displacement | 33 cm3/rev |
| Flow at 1500 Rpm | 48 l/min |