English
Nederlands
Deutsch
Pricing
Your price
€ 555,20
Shown price does not include VAT
SKU
P1.50730
Stock
11
Specifications
Flange
European 4-hole mounting
Axle type
cylindrical dia. 20mm with key
Connection
standard European port
Turning direction
both
Displacement
26 cm3/rev
Flow at 1500 Rpm
37 l/min
Category
Search code
ALM3R40C0E1
| Build type | gear motor |
| Max. torq shaft | 100±4 Nm |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 230 bar |
| Max. pressure intermittent | 220 bar |
| Max. peak pressure | 250 bar |
| Max. revs | 3000 rpm |
| Min. revs | 500 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft diameter | 20 mm |
| Shaft length | 41 mm |
| Shaft length inc. fitting edge | 46 mm |
| Height fitting edge | 5 mm |
| Dia. fitting edge | 50.8 mm |
| Center inlet - front | 66 mm |
| Front - back excl. fitting edge | 133.5 mm |
| Thread mounting bolt sunction side | M10 |
| Size bolts sunction side | 56 mm |
| Thread bolt press side | M10 |
| Size bolts press side | 56 mm |
| Dia. mounting hole front | 11 mm |
| Size mounting holes front | 98,5x128 mm |
| Dia. drain connection | 3/8" BSP |
| key width | 5 mm |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 350 Nm |
| Flange | European 4-hole mounting |
| Shaft type | cylindrical dia. 20mm with key |
| Connection | standard European port |
| Turning direction | both |
| Displacement | 26 cm3/rev |
| Flow at 1500 Rpm | 37 l/min |