Pricing
Category
Brand
Search code
ALM3R50C0E1
Specifications
Flange
European 4-hole mounting
Axle type
cylindrical dia. 20mm with key
Connection
standard European port
Turning direction
both
Displacement
33 cm3/rev
Flow at 1500 Rpm
48 l/min
Extra
Build type | gear motor |
Max. torq shaft | 100±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2008 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 220 bar |
Max. pressure intermittent | 230 bar |
Max. peak pressure | 250 bar |
Max. revs | 3000 rpm |
Min. revs | 500 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft diameter | 20 mm |
Shaft length | 40 mm |
Shaft length inc. fitting edge | 45 mm |
Height fitting edge | 5 mm |
Dia. fitting edge | 50.8 mm |
Center inlet - front | 68.5 mm |
Front - back excl. fitting edge | 138.5 mm |
Thread mounting bolt sunction side | M10 |
Size bolts sunction side | 56 mm |
Thread bolt press side | M10 |
Size bolts press side | 56 mm |
Dia. mounting hole front | 11 mm |
Size mounting holes front | 98.5 x 128 mm |
Dia. drain connection | 1/4" BSP |
key width | 5 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
Sound level | middle |
Shaft load 1 (Max. torq) | 350 Nm |
Flange | European 4-hole mounting |
Shaft type | cylindrical dia. 20mm with key |
Connection | standard European port |
Turning direction | both |
Displacement | 33 cm3/rev |
Flow at 1500 Rpm | 48 l/min |