Pricing
SKU
P1.51220
Stock
20
Your price
€ 587,60
Category
Brand
Search code
ALM3R94E1
Specifications
Flange
European 4-hole mounting
Axle type
conical 1:8 with key
Connection
standard European port
Turning direction
both
Displacement
61 cm3/rev
Flow at 1500 Rpm
87 l/min
Extra
Build type | gear motor |
Max. torq shaft | 100±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 190 bar |
Max. pressure intermittent | 180 bar |
Max. peak pressure | 205 bar |
Max. revs | 2800 rpm |
Min. revs | 400 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft thread | M14x1,5 |
Shaft length | 42 mm |
Shaft length inc. fitting edge | 47 mm |
Height fitting edge | 5 mm |
Dia. fitting edge | 50.8 mm |
Center inlet - front | 78 mm |
Front - back excl. fitting edge | 157.5 mm |
Thread mounting bolt sunction side | M10 |
Size bolts sunction side | 62 mm |
Thread bolt press side | M10 |
Size bolts press side | 62 mm |
Dia. mounting hole front | 11 mm |
Size mounting holes front | 98,5x128 mm |
Dia. drain connection | 3/8" BSP |
key width | 4 mm |
Material front and back | aluminium |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 300 Nm |
Flange | European 4-hole mounting |
Shaft type | conical 1:8 with key |
Connection | standard European port |
Turning direction | both |
Displacement | 61 cm3/rev |
Flow at 1500 Rpm | 87 l/min |