English
Nederlands
Deutsch
Specifications
Flange
SAE A version 2-hole
Axle type
spline-shaft SAE 9T 16/32-30
Connection
BSPP ports (GAS)
Turning direction
both
Displacement
9.6 cm3/rev
Flow at 1500 Rpm
13.7 l/min
Category
Search code
GHM2AR13S1FGE
| Build type | gear motor |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 280 bar |
| Max. pressure intermittent | 270 bar |
| Max. peak pressure | 295 bar |
| Max. revs | 4000 rpm |
| Min. revs | 700 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft diameter | 15.88 mm |
| Shaft length | 25.6 mm |
| Shaft length inc. fitting edge | 32 mm |
| Height fitting edge | 6.4 mm |
| Dia. fitting edge | 82.55 mm |
| Center inlet - front | 49.5 mm |
| Front - back excl. fitting edge | 100 mm |
| Thread connection sunction side | G1/2 |
| Thread connection press side | G1/2 |
| Dia. mounting hole front | 11.1 mm |
| Size mounting holes front | 106.4 mm |
| Material front and back | cast iron |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 185 Nm |
| Flange | SAE A version 2-hole |
| Shaft type | spline-shaft SAE 9T 16/32-30 |
| Connection | BSPP ports (GAS) |
| Turning direction | both |
| Displacement | 9.6 cm3/rev |
| Flow at 1500 Rpm | 13.7 l/min |