Pricing
Category
Brand
Search code
GHM35R94E1
Specifications
Flange
European 4-hole mounting
Axle type
conical 1:8 with key
Connection
standard European port
Turning direction
both
Displacement
61 cm3/rev
Flow at 1500 Rpm
87 l/min
Extra
Build type | gear motor |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 210 bar |
Max. pressure intermittent | 200 bar |
Max. peak pressure | 225 bar |
Max. revs | 2800 rpm |
Min. revs | 400 rpm |
Volume efficiency | 95% between 1000 - 2000rpm |
Shaft thread | M16x1,5 |
Shaft length | 52 mm |
Shaft length inc. fitting edge | 58 mm |
Height fitting edge | 6 mm |
Dia. fitting edge | 60 mm |
Center inlet - front | 78 mm |
Front - back excl. fitting edge | 155 mm |
Thread mounting bolt sunction side | M10 |
Size bolts sunction side | 62 mm |
Thread bolt press side | M10 |
Size bolts press side | 62 mm |
Dia. mounting hole front | 13.5 mm |
Size mounting holes front | 114,2/127x148/149,4 mm |
Dia. drain connection | 3/8" BSP |
key width | 5 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 400 Nm |
Flange | European 4-hole mounting |
Shaft type | conical 1:8 with key |
Connection | standard European port |
Turning direction | both |
Displacement | 61 cm3/rev |
Flow at 1500 Rpm | 87 l/min |